P. 26 Installation Guide
Note: For Hardware 5.0 and higher, there can only be one bypass connected to the unit.
Multi-car Operation
This option allows the owner of two vehicles, both equipped with identical systems, to control both
systems with only one remote transmitter. (see user guide for operation)
Note: See transmitter programming section on how to learn the transmitter to the second car.
Intrusion Codes via LED light
The system monitors the following:
• Any vibrations sensed by the shock sensor such as someone breaking the window,
windshield, etc.
• Doors
• Ignition
• Hood
Note: If an intrusion has occurred the siren will sound for a maximum of 1minute.
When an intrusion has occurred, pressing unlock will make the siren chirps four times. The
antenna’s LED will provide an intrusion code corresponding to the type of the intrusion that
occurred. The LED intrusion codes are flashed in continuous loops.
Diagnostics via parking lights
Diagnostic table for shutdown.
2
•
•
•
•
•
•
•
Diagnostic table for start failure.
1
(Manual transmission only)
•
Ready mode is not activated.
• Tach signal is not learned.
•
The system is set to valet mode.
(Automatic transmission
only)
• The parking brake is active.
• Yellow loop is connected.
•
Comments to this Manuals