ProStart CT-3371 Installation Guide download pdf (Page 17)

Installation guide P.17

EnteringProgrammingMode

This allows the installer to program the unit. Once the system is in programming mode, the

installer will have up to 20 seconds to select one of the sub-menus. If the installer fails to select

a sub-menu before the 20-second delay, the system will exit programming mode.

Using the Hood Pin

Using the Antenna Programming Assistance

Button (A.P.A.B.) (Optional)

• Press and hold the hood pin for 4 seconds.

•

Make sure the hood is closed.

• Release the hood pin.

The parking lights will turn ON.

•

Turn the ignition key to the IGNITION ON

(RUN) position.

• While the parking lights are ON, press the

hood pin once more and release

immediately.

The parking lights will turn ON and stay ON

for 20 seconds.

• Within 5 seconds, press the programming

button on the antenna twice for 1 second

each time.

The LED will come ON solid.

• You now have 20 seconds to select one of

the sub-menus.

• You now have 20 seconds to select one of

the sub-menus.

Note: To exit programming mode, close the

hood.

Note: To exit programming mode, press on the

antenna button once (the LED will come ON)

and release.

TheProgrammingAssistanceButton(a.k.a.PAB)

The PAB is located on the

side of the module. This

push button mimics the

hood-pin switch in order to

avoid having to get out of

the vehicle and pressing

the hood-pin switch. The

PAB will work only when

the hood is up.

Sub-menus:

a) Transmitter Programming

b) Programming Options

c) Honk Horn Timing Adjustment

d) Tach Programming

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 29 30

Comments to this Manuals

No comments

ProStart CT-3371 Installation Guide Page 17

Comments to this Manuals

Related products and manuals for Remote starters ProStart CT-3371