ProStart CT-3371 Installation Guide download pdf (Page 27)

Installation guide P.27

Parkinglightsflashessummarytable

Parking lights flashes Description

• Doors locked.

• Trunk released.

• Enable LED flashing via remote.

• Start signal received from the remote.

2 slow

• Power OFF Î ON; transmission is set to automatic.

2 fast

• Doors unlocked

• Valet mode is deactivated

3 slow

• Runtime is extended.

3 fast

• Valet mode activated.

• Disable LED flashing via remote.

4 fast

• Power OFF Î ON; transmission is set to manual.

• Enter multi speed tach programming

• Enter time delay adjustment in virtual tach system.

5 fast

• Tach signal is learned successfully.

• Transmitter is learned successfully.

8 fast

• The unit is reset.

ON Î twice

• Cold weather mode deactivated

ON Î 3 times

• Cold weather mode activated.

ON for 20sec

• Enter programming mode

Solid ON

• Engine is running under remote start.

Flash for 30sec

• Panic mode is triggered.

Flash for 60sec

• Alarm is triggered.

ON Î twice Î twice

• A remote start was attempted while the system is in home valet.

Resettingthemoduletodefaultfeatures

Resetting the module is not a required process. Most of the time, you can avoid resetting the

module by fixing the issue directly at the root of the cause.

To reset the module:

1) Enter programming mode (page-17)

2) In 20 seconds or less, press and release the brake pedal 6 times.

3) The parking lights will flash 8 times, confirming the reset.

On some vehicles such as BMWs and certain Volkswagens, pressing the brake pedal without the

key in the ignition ON position will not work. If this is the case, simply leave the ignition ON while

performing the reset.

1 2 ... 22 23 24 25 26 27 28 29 30

Comments to this Manuals

No comments

ProStart CT-3371 Installation Guide Page 27

Comments to this Manuals

Related products and manuals for Remote starters ProStart CT-3371